Grade Your Access Calibration DB Against ALCOA+
Run your legacy MS Access calibration database through a 10-point ALCOA+ self-audit. See exactly where it fails an ISO 9001, IATF 16949 or 17025 auditor.
PrüfDesk
Your calibration control desk
Your Calibration Report Template Is Uncontrolled
Under ISO 9001 clause 7.5, your Access calibration report template is uncontrolled documented information. The real audit risk—and how to fix it in stages.
Hardness Tester Indirect Verification: Close the Gap
Your hardness tester passed its annual verification — but did anyone check it since? Indirect verification against reference blocks keeps it audit-ready.
Inside a DCC: Anatomy of the PTB v3.3.0 Schema
A block-by-block tour of the PTB DCC XML schema v3.3.0: administrative data, measurement results, D-SI units, and the signature that makes it trustworthy.
Signed DCC vs Spreadsheet: Tamper-Evidence at Audit
A re-keyed spreadsheet cell proves nothing at audit. A signed Digital Calibration Certificate is evidence your assessor accepts — and how to ingest one.
Was the Gauge in Cal When the Gage R&R Ran?
Your %GRR passed at 8%. But was the gauge in cal on the study date? Why IATF auditors void good MSA studies — and how to keep the two records agreeing.
IATF 16949: The Certificate Is Not the Record
A supplier calibration certificate won't satisfy IATF 16949 clause 7.1.5.2.1. See the four fields your calibration record must carry to pass audit.
Traceability to PTB, Not NIST: What EU Auditors Check
An EU auditor follows your cal cert to the SI. If it defaults to NIST, can you show the European route? What ISO/IEC 17025 clause 6.5 really wants.
CET Support When Overdue Blocking Stops the Line
A hard-blocked gauge halts the line at 09:00 CET. If your vendor's desk opens at 09:00 US time, that's a lost shift. The case for EU-hours support.
NIS2: Your Calibration Records Are Now In Scope
NIS2 enforcement is live and moving to national regulators. Your calibration data sits in your in-scope IT estate — here is what that now demands.