Your Access DB Can’t Tell You a Gauge Is Overdue
Your Access calibration database waits for someone to open it. Here's why passive tracking fails audits — and how to migrate to automatic overdue alerts.
PrüfDesk
Your calibration control desk
When Your Access Report Recalculates, History Disappears
Reprint last quarter's overdue calibration report from Access and it won't match. Here's why live queries break traceability — and how to fix it.
When a Checkout Crosses the Calibration Due Date
A gauge booked out for a long job can go overdue mid-possession and quietly break traceability. Catch the collision at approval, not at audit.
When Your Calibration Record Becomes Legal Evidence
The revised EU Product Liability Directive transposes 9 Dec 2026. Shifted burden of proof and court disclosure turn your calibration trail into a defence.
Prove Your FAI Gauge Was In-Cal on the Inspection Date
An overdue gauge can void a First Article Inspection later. Here's how to prove the exact instrument was in calibration the day it measured the part.
Audit-Ready Calibration Cutover in Weeks, Not Months
Your IATF 16949 surveillance audit is closer than a 6–12 month rollout. How an EU-native calibration cutover fits inside one calibration cycle.
Your Calibration Software Is a CRA-Regulated Product
CRA reporting went live 11 Sep 2026. Your calibration tool is now a product with digital elements — here are the vendor questions that changed.
Your Tool Presetter Is Uncontrolled Measuring Equipment
The optical tool presetter sets offsets that become part geometry, yet it stays off the calibration register — why that fails ISO 9001 7.1.5, and the fix.
Used CMM From IMTS? Where Your Baseline Begins
Bought a preowned CMM at IMTS with an unknown calibration history? How to establish a defensible controlled baseline before its first inspection.
The VLOOKUP That Hid an Overdue Gauge
One broken VLOOKUP drops an instrument from your overdue list until the auditor finds it. Why the Excel half of your Access stack fails silently.