Match a DCC to the Right Gauge: Read the Item Identifiers
Four identical plug gauges, four DCCs back from the lab. Match on issuer-qualified item identifiers, not the gauge name, before you link the evidence.
Tag: ISO 9001 7.1.5.2
OOT Reverse Traceability Across a Calibration-System Cutover
An out-of-tolerance standard found after go-live means a suspect window in two systems. How to make that reverse trace one query before you migrate.
Scrapped Gauges in an Access Migration: Migrate or Archive?
Leaving retired instruments in the old .accdb looks tidy, until a complaint reaches a gauge you scrapped two years ago. How to scope them.
Dropped Gauge? The Unscheduled Calibration Record
A dropped gauge isn't due for calibration, but it can't measure again. The as-found reading, possession trail and record ISO 9001 7.1.5.2 c expects.
When the Lab Reissues a DCC: Supersede, Don’t Overwrite
A revised DCC lands weeks after you ingested the original. Overwrite it and you lose your audit evidence. How to supersede it under ISO/IEC 17025 7.8.8.
DAkkS Calibration Mark: Whose Next Date Governs?
The DAkkS calibration mark can print a next calibration date. Your interval rule still sets the due date. Here's how to handle a mismatch.
Leavers and Permanently Allocated Gauges: Close the Gap
He left in June. His micrometer is due in November and still in his name. How to offboard calibrated gauges before an auditor finds the gap.
Your Access Location Field Is Erasing Gauge History
A gauge fails as-found. Your Access DB says where it is now, not where it was in March. Why one overwritten field breaks ISO 9001 7.1.5.2 impact reviews.
The Gauge Your Access Overdue Query Can Never See
A blank interval makes a gauge invisible to your Access overdue report. Find every one in ten minutes, before your auditor or your migration does.
Out-of-Tolerance Gauge Recall: The Impact Assessment
A gauge fails as-found at recalibration. Now prove which parts it touched — the out-of-tolerance impact assessment auditors expect, spreadsheets can't.