Scrapped Gauges in an Access Migration: Migrate or Archive?
Leaving retired instruments in the old .accdb looks tidy, until a complaint reaches a gauge you scrapped two years ago. How to scope them.
PrüfDesk
Your calibration control desk
ISO 9001:2026: Your Access Calibration DB Is a 6.1 Risk
Rebuilding your clause 6.1 risk register for ISO 9001:2026? The Access file behind every calibration due date belongs on it. Here's a worked entry.
Access Write Conflict: When ‘Save Record’ Erases a Result
Two technicians, one Access calibration record, one dialog box. How 'Save Record' can erase an as-found result without a trace, and how to close the gap.
IATF 7.1.5.3.1: Prove Internal Lab Scope Per Calibration
Your internal lab scope is a Word file. The auditor samples a calibration record. Here is how to prove that record sat inside the scope, line by line.
Upgrade or Migrate? ISO 17025 7.11 Validation Either Way
A MET/TEAM 3.3 upgrade and a migration both need ISO/IEC 17025 7.11 validation. Compare the two packages side by side before budget close.
Keep the Test Points, Not Just the Verdict, When You Migrate
A PASS tells an auditor nothing about drift or impact. How to carry point-level as-found/as-left data out of MET/TEAM 3.3.x, and prove it arrived intact.
Calibration Interval Changes: Approval and Audit Trail
You extended a calibration interval. Can you show who approved it, what data justified it, and which due dates moved? How to make the change audit-proof.
XSD-Valid Isn’t Accepted: 3 DCC Validation Gates
Your DCC passed XSD validation. It can still be unsigned, altered or for the wrong instrument. Three ingest gates that make a DCC safe to trust.
When the Lab Reissues a DCC: Supersede, Don’t Overwrite
A revised DCC lands weeks after you ingested the original. Overwrite it and you lose your audit evidence. How to supersede it under ISO/IEC 17025 7.8.8.
Put Your Pyrometry Chain on the Calibration Register
FTIs, SAT sensors and first-use thermocouples kept in a separate binder are the weak point of a heat-treat audit. Here is how to register each link.